Industry-standard 60” full HD 16:9 LED video wall High brightness Redundancy of critical components Low power consumption Remote management High reliability Sustainable product
The OverView MVL-621 is an easy to operate 16:9 LED-lit projection module that has been designed to offer the typical detail, brightness, and features in full HD resolution for control rooms where space is not a constraint.
This rear-projection video wall offers a well-balanced set of essential features, perfectly fitting the standard requirements. All this comes without any compromise in quality, and with a special focus on sustainability – in terms of limited power consumption, long lifetime and ability to upcycle.
The next-generation LED light source drastically improves the brightness of the MVL-621. With a 55% increase in maximum engine light output compared with the industry standard, the MVL-621 can be deployed in virtually all indoor lighting conditions. This impressive increase in brightness is realized with the exact same power needs.
MVL-621 also brings an important step-up in reliability, featuring redundant inputs to ensure a continuous data flow, an optional external power supply with automatic failover, and a light source lifetime of over 100,000 hours.
Barco's Video wall Manager software makes it a lot easier to install, configure and control the video wall. The cloud-based Video wall Management Suite, on its part, allows remote monitoring, diagnostics and control for Barco video walls. Allowing this kind of remote management from a central location, lowers operational costs and ensures faster and more effective troubleshooting.
|Resolution||Full HD (1920x1080)|
|On-screen contrast||1,200,000:1 (dynamic)|
|Display technology||Rear-projection DLP (rear access only)|
|White point||Customized white points|
|Screen||Mid Gain Type, 180° viewing angle|
|Screen gap||Adjustable up to 0.2 mm depending upon video wall configuration and operating temperature|
|Color stability||Sense X: automatic real-time color and brightness calibration|
|Light source||6x redundancy for each of 3 LEDs|
|Noise Level||Less than 20 dB (measured from 5m in front)|
|Light source lifetime||> 100,000h in Eco/Normal mode|
|Conditions for operation||10°C – 40°C | 50°F – 104°F|
Up to 80% humidity (non-condensing)
|Input voltage||90 – 240 VAC, 50-60Hz|
|Heat dissipation||240 BTU/h (eco)|
340 BTU/h (typ.)
510 BTU/h (max)
|Signal input/output||2x DP1.2 inputs & 1x output (4K@60Hz)|
2x HDMI 2.0 inputs (4K@60Hz)
2x USB ports (only for power)
2x Ethernet ports
|External power supply||Optional: Remote and redundant hot swappable power supply|
|Signal processing||Loop through|
Cropping, scaling with wall configuration
|Direct ethernet access||Built-in web server|
|Graphical user interface||All settings and operational parameters|
|Third party interface||WEB service API|