70" laser-lit rear-projection video walls for 24/7 control rooms 50% more brightness than mainstream LED-lit rear-projection video walls 25% less power consumption at higher brightness levels More than 11 years of uninterrupted operation in 24/7 mode Unmatched colors, focus, and contrast levels Silent like never before (‘library’ noise level) Redundancy of critical components for ultimate peace of mind 50% setup-time reduction (motorized 7-axis alignment)



Learn More


Powered with the latest laser technology, Barco's RGB laser rear-projection video walls deliver unseen brightness levels and vibrant colors, while offering a very low total cost of ownership (TCO). With its 10th generation of rear-projection video walls, Barco again raises the bar for critical infrastructure visualization.

Higher brightness, for use in any environment

Providing 50% more brightness than mainstream 70" LED-lit rear-projection video walls, the RGB Laser series removes all brightness issues of earlier video walls. The high luminance allows operation under daylight conditions, so control rooms can finally light up - which improves operator working conditions! Adding vibrant colors to this mix (making all nuances clearly distinguishable), ensures that nothing is wrongly interpreted, and situational awareness is enriched.

Over 11 years of uninterrupted 24/7 operations

With the RGB laser for 24/7 control rooms series, Barco takes another giant leap forward in terms of reliability. With a light source lifetime of at least 125,000 hours in both normal and eco-mode, and redundancy of all critical components (including power supply, inputs, and laser drivers), nothing is left to chance when it comes to uptime. Unlike technology used by others and for non-24/7 environments, Barco's RGB laser display series doesn't need a rotating color wheel to operate. Since each color can be uniquely controlled and is not dependent on the segment of a color wheel, it provides color control like never before and eliminates color breakup.

Automatic calibration and alignment

The engine of Barco’s RGB laser for 24/7 control rooms is fully motorized. Installers and maintenance staff will never need to open up the individual modules to perfectly align the individual cubes of the video wall. Using a web interface, the video wall can be remotely aligned by a single technician - including keystone correction. Combined with the Sense X automatic calibration system, which continuously measures and adjusts brightness and color levels over the complete video wall, users are sure the complete canvas is perfectly balanced at any time.

  • Laser light source
  •  
  • Aspect ratio 4:3
  •  
  • Easy installation
  •  
  • Low noise operation
  •  
  • Redundant LED design, redundant inputs
  •  
  • Compact footprint, space-saving design


Specifications

ResolutionSXGA+ (1400x1050)
Screen

Nativecolorgamut
Screen typeFXS StitchedLight source lifetime (hrs)*Power usage (W)
Boost660 cd/m²60,000260
Normal510 cd/m²125,000200
Eco255 cd/m²125,000120
Horizontal half gain viewing angle34°--
Vertical half gain viewing angle33°--
On-screen contrast1800:1
ColorUp to 170% REC709 color triangle
Display technologyRear projection DLP (Rear Access only)
White pointCustomized white points
Brightness uniformityTyp. >95% ANSI 9 Typ. >90% ANSI 13
Screen gap< 0.2 mm | 0.008" stitched
Color stabilitySense X automatic calibration
Dimensions
  • Diagonal: 70" nominal
  • Width: 1,400 mm / 55.1"
  • Height: 1,050 mm / 41.3"
  • Depth: 983 mm / 38.7"
Light sourceRGB lasers illumination
RedundancyRedundant laser banks with redundant power supply drivers, input signal & external power supply
Light source lifetime> 125,000 hrs in both Normal and Eco mode*
Noise LevelLess than 20 dB (measured from 3 meters in front)
Conditions for operation10°C-40°C | 50°F-104°F
Up to 80% humidity (non-condensing)
AC input voltage100 – 240 VAC, 50-60Hz
Power120W (eco)
200W (normal)
Heat dissipation390 BTU/h (eco)
680 BTU/h (typ.)
860 BTU/h (max)
ConnectivityRedundant DP & Redundant HDMI
Signal processingLoop through
Cropping, scaling with wall configuration
Direct ethernet accessBuilt in web server
Graphical user interfaceAll settings and operational parameters
Integration to third party equipmentWEB service API
WeightSupport frame:(1m):42kg
Projection Module(no screen):65kg

 

Warranty2 years
Notes* for ODL Gen2 engine